IT Ess 2 Modul 7

1

The figure shows a section of the display from Device Manager. What does it show about the laser printer?

The network cable is unplugged.
*Windows recognized the device but could not locate a suitable driver.
Windows does not know the proper name of the device.
Windows could not locate the device in the expected location.

2 What is the first step every computer will perform when it is turned on, regardless of the operating system?

*boot
RAM
POST
SCSI

3 What is the best source of hardware compatibility information?

*the World Wide Web
a hardware manual
a software manual
the CD-ROM readme document

4 Which of the following Windows file systems is the most appropriate for a network file server?

FAT16
FAT32
*NTFS
HFS

5 A technician is trying to configure a PC to dual boot with Windows XP and Linux. XP has already been installed and configured in one partition. Linux has been installed in another partition. The technician wishes to replace the LILO loader with grub but is having problems. What is the most likely cause of the problem?

*The technician did not remove the LILO files first.
Grub will not work with XP.
Linux should have been loaded first.
The technician did not run /sbin/grub-install.

6 When setting up a hard disk, what are the three possible types of partitions?

*primary, secondary, and logical
primary, logical, and extended
C, D, and E
boot, program, and data

7 What are two valid file systems for a Linux partition? (Choose two.)

ext1
ext2
*ext3
*HFS
boot
FAT

8 ext3 introduced journaling capabilities to Linux file systems. What is an advantage of a journaling file system?

*It reduces the time spent recovering a file system after a crash.
It allows administrators to determine the owners of files created on the system.
It keeps file clusters attached to the files to which they are allocated.
It enables Linux systems to interoperate with Windows systems.

9 How is the root partition identified in Linux?

?
Root
/root
*/

10 Linux systems typically dedicate an entire partition to virtual memory. What is this partition called?

the RAM partition
*the swap partition
the pagefile partition
the page partition
the memory partition

11 Which Windows utility can be used to perform a hardware inventory?

Administrative Tools
ScanDisk
Windows Explorer
*Device Manager

12 The ping command is used to test network connectivity. What is the best IP address to ping for this test?

the DNS address
the loopback address
the local NIC address
*the default gateway address

13 Which Windows file performs the same function as the Linux LILO files?

HAL
*NTLDR
NTDETECT
NTOSKRNL

14 Which task should be performed before installing a NOS?

Change the system hardware and peripherals before beginning.
*Verify that the NOS supports all application software that will run on the server.
Run the evaluator software prior to loading to establish hardware settings.
Be familiar with the NOS so configuration questions can be ignored.

15 How many partitions can an MS-DOS-type partition table describe?

one
two
*four
eight

16 Which four items of information are required for TCP/IP network configuration? (Choose four.)

*IP address of host
*subnet mask
MAC address
*IP address of default gateway
*IP address of DNS server
host name

17 What must be done when setting up a RAID array in Linux?

*All the disks must be partitioned as primary partitions.
All the partitions need an extended partition.
The disks must be mounted using LVM.
The disks must be formatted using NFS.

18 Most NOSs will only run on certain hardware configurations. For which four items are minimum requirements specified? (Choose four.)

*CPU speed
*CPU type
*RAM
CD-ROM drive
*hard disk space
NIC